-
Low Air Pressure Tungsten Carbide DTH Button Drill Bit
Low air pressure DTH hammers specificatioinsModelOD*TL(mm)Air pressure(Mpa)Air consumption (m3/min.)bits diameter *shank*spline no.impact frequency (strike/min.)weight(kg)CIR55Φ48*6570.5-0.72.0-2.555-60*31*48406CIR60Φ53*6570.5-0.72.5-3.558-65*34*48407CIR70Φ61*7650.5-0.73.570*42*48409CIR7
-
Top Hammer DTH Button Bit for Down The Hole Drilling
Some BITS for referanceHammer: COP 32Diameter mmPart No.Buttons x Button diam(Gauge outer, Gauge inner, Centre, Cone)Gauge buttons angle o (Outer, Inner, Cone)Flushing holes (No. x size mm)Weight approx. kgFoot valve Part No.Flat front, HD85100-5085-39,24-208x11, - ,6x11, -35, -, -24.590100-5090-39,
-
Taper Drill Button Bit for Small Hole Drilling in Quarry
Drill Bit: Button BitFor 22 mm ( 7 /8") rod. 4°46' taper. Short skirt.Diameter (mm)Part No.Length (mm)No. of buttonsButtons x button diameter (Gauge, Centre)Gauge Buttons angle ° (Gauge, Front)Flushing hole (Side, Centre)Weight approx (kg)36178-9036-14-67,39-205075x7, 2x735, -1, 20.3431
-
Small Hole Drillingtungsten Carbide Quarry Taper Button Bit
Drill Bit: Button BitFor 22 mm ( 7 /8") rod. 4°46' taper. Short skirt.Diameter (mm)Part No.Length (mm)No. of buttonsButtons x button diameter (Gauge, Centre)Gauge Buttons angle ° (Gauge, Front)Flushing hole (Side, Centre)Weight approx (kg)36178-9036-14-67,39-205075x7, 2x735, -1, 20.3431
-
Hexagon 108mm Taper Drill Steel for Rock Mining
4°46' taperLength (mm)Part No.Weight (kg)800578-0108,112.91600578-0116,115.42000578-0120,116.62200578-0122,117.12400578-0124,117.83200578-0132,1110.23500578-0135,1111.14000578-0140,1112.77° taperLength (mm)Part No.Weight (kg)400573-0104,111.7800573-0108,112.91830573-0118,1162000573-0120,116.
-
Tungsten Carbide Small Hole Drilling Button Bits for Rock Exploitation
Taperdegreea=4°,6°,7°,11°,12°; Socket inside d=15,19,22,25mmmmmm220652236522569228602305588232556471802347180236742387424074242742457422. Tapered cross bitUsed under any rock drilling condition and mainly used for hard or very hard rock formation because of it's comprehensive ada
-
4 Inch Tungsten Carbide DTH Hole Opener
Basic Info. Model NO. COP42, COP44, BR4, HYPER41, DHD340
-
Maxdrill 11° 800mm Taper Drilling Rod
Basic Info. Model NO. 102208-07